Modern Sanitary Ware

  How long should a shower hose be? The NEWSTAR shower hose can be divided into bidet hose and shower hose . The length of the bidet hose is generally 120cm, usually installed on one side of the toilet, and connected to the water inlet and the toilet through an angle valve. Because there is not much space for using this kind of hose, 120cm is a more suitable length. If the hose is too long, it will become knotted and inconvenient to use. The most common one in daily life is the shower hose. The usual use environment is bathtub, shower room, etc. Depending on the size of the space used, the length of the hose varies from 150cm (60 feet) to 240cm (95 feet). This type of hose not only needs to meet the needs of a full-body shower, but also plays a great role in cleaning the bathtub or even the entire bathroom. Therefore, a length of at least 150 cm is required to meet the above requirements. Faced with a small bathroom space, the flexible hose produced by Our company ...

  The NEWSTAR conventional shower connector is shown in the figure below, the size is M1/2 cylindrical pipe thread, and adopts BSPT standard. The connectors of the shower hose consists of two parts. Generally speaking, one end of the cone nut is connected to the shower or bidet, and the other end of the Hexagon nut is connected to the water inlet or faucet. The two ends of the shower hose are generally made of BSPT standard (BS EN ISO228-1), and the size is G1/2 non-threaded sealed pipe thread. This standard is almost universal in the world, but it should be noted that the thread gauge in the US market adopts the American NPT standard. The thread profile angle under this standard is 60 degrees, while the BSPT standard thread profile gauge is 55 degrees. Both There are obvious differences. Therefore, if the product market is not in North America, all showers and shower hoses that meet the BSPT standard are universal. In the North American market, you need to use NPT standard sho...

  The difference between metal shower hose and PVC shower hose High water pressure resistance performance: The inner tube of the metal shower hose on the market is made of EPDM, which has excellent high temperature resistance and aging resistance. The outer layer is wrapped with a stainless steel tube, and the maximum working water pressure can reach 20 BAR. PVC shower hoses are generally divided into 3-5 layers, all made of PVC. Because there is no outer metal tube protection, nylon threads are usually braided in the middle of the tube to meet the requirements of high water pressure. Corrosion resistance: The surface treatment of the metal hose is usually divided into polishing and electroplating. The electroplating layer is mainly nickel and chromium, so that it can resist corrosion for a long time and keep the surface of the hose bright as new. The PVC material on the surface of the PVC hose has the advantages of corrosion resistance and easy cleaning...

  The material of shower hose can be divided into metal shower hose and plastic shower hose . Metal shower hose is the mainstream in the market. Metal shower hoses are divided into stainless steel and copper materials. Stainless steel shower hose is widely used all over the world. In the Italian market, copper shower hoses also have a large market share. The structure of the metal shower hose is divided into an inner tube and outer cover. The outer cover is made of stainless steel or copper. The inner tube is mainly PVC and EPDM. EPDM is usually used as a high-quality stretch because of its good elasticity and stretch. The internationally accepted specification of the hose connection port is G1/2. The two ends are respectively made of conical nut and hex nut. The cone nut is connected with the shower head, and the spherical nut is connected with the shower faucet. Our company's high-quality shower hose has the following characteristics: 1. The hose adopts a double l...